BRTMF - S 20 GB
- MSDS: BRTMF
- Manufacturer: ALLOY RODS CORP
- Product Name: S 20 GB
- National Stock Number: 3439-00F028502
Product Identification
Product ID:S 20 GB
MSDS Date:03/06/1990
FSC:3439
NIIN:00F028502
MSDS Number: BRTMF
Responsible Party
HANOVER, PA 17331
US
Emergency Phone: 717-637-8911
Info Phone: 717-637-8911
Cage: GO230
Contractor
Telephone: 717-637-8911 OR 800-933-7070
Cage: 84021
Ingredients
MAGNESIUM OXIDE, MAGNESIA
CAS: 1309-48-4
RTECS: OM3850000
OSHA PEL 15 MG/M3 PARTICULATE
ACGIH TLV: 10 MG/M3;TDUST; 9293
SILICON
CAS: 7440-21-3
RTECS: VW0400000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN
CAS: 14808-60-7
RTECS: VV7330000
OSHA PEL SEE TABLE Z3
ACGIH TLV: 0.1 MG/M3 RDUST;9293
ALUMINUM OXIDE, BAUXITE, ALUMINA, DIALUMINUM TRIOXIDE
CAS: 1344-28-1
RTECS: BD1200000
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
CALCIUM FLUORIDE, FLUORSPAR, CALCIUM DIFLUORIDE, IRTRAN 3,
CAS: 7789-75-5
RTECS: EW1760000
OSHA PEL 2.5 MG/CUM (AS F)
ACGIH TLV: 2.5 MG/CUM (AS F)
MANGANESE II OXIDE
CAS: 1344-43-0
RTECS: OP0900000
OSHA PEL 1 MG/CUM
ACGIH TLV: 5 MG/CUM
CRYOLITE, SODIUM ALUMINUM FLUORIDE, SODIUM FLUOALUMINATE
CAS: 15096-52-3
RTECS: WA9625000
OSHA PEL 2.5 MG/CUM (AS F)
ACGIH TLV: 2.5 MG/CUM (AS F)
SODIUM METASILICATE; SODIUM SILICATE; WATER GLASS; DISODIUM
CAS: 6834-92-0
RTECS: VV9275000
POTASSIUM SILICATE, POTASSIUM METASILICATE *93-1*
CAS: 1312-76-1
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF NOSE, THROAT, EYES. MAY
LEAD TO SIDEROSIS WHICH MAY AFFECT PULMONARY FUNCTION. ARC RAYS CAN
INJURE EYES & BURN SKIN. ELECTRIC SHOCK CAN KILL. SEE SUPP.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: DIZZINESS, NAUSEA, IRRITATION OF
NOSE & THROAT. EYES: IRRITATION. SKIN: DRYNESS & BURNS.
First Aid
First Aid:EMPLOY FIRST AID TECHNIQUES RECOMMENDED BY THE AMERICAN RED
CROSS. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:NON-FLAMMABLE
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES.
Handling
Handling and Storage Precautions:KEEP HEAD OUT OF FUMES, DON'T TOUCH
LIVE ELECTRICAL PARTS, INSULATE FROM WORK AND GROUND.
Other Precautions:TO DETERMINE COMPOSITION & QUANTITY OF FUMES & GASES
TO WHICH WORKERS ARE EXPOSED IS TO TAKE AN AIR SAMPLE INSIDE THE
WELDERS HELMET OR IN THE WORKER'S BREATHING ZONE.
Exposure Controls
Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
RESPIRATOR WHEN WELDING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV.
Ventilation:LOCAL EXHAUST AT THE ARC TO KEEP THE FUMES & GASES BELOW
THE TLV.
Protective Gloves:WELDERS GLOVES
Eye Protection:FACE SHIELD W/APPROPRIATE FILTER LENS
Other Protective Equipment:HELMET, ARM PROTECTORS, APRONS, HATS,
SHOULDER PROTECTION, DARK SUBSTANTIAL CLOTHING, SCREENS, FLASH
GOGGLES.
Supplemental Safety and Health
THE PRODUCT AS SUPPLIED IS NON-HAZARDOUS. HEALTH HAZARDS OCCUR DURING
OPERATIONS. THE COMPOSITION & QUANTITY OF WELDING FUMES ARE
DEPENDENT ON THE PROCESS, PROCEDURES, MEDIA, CONTAMINENTS IN THE
ATMOS PHERE, & ELECTRODES USED.
Stability
Stability Indicator/Materials to Avoid:YES
SEE SUPP
Stability Condition to Avoid:SEE SUPP
Hazardous Decomposition Products:CO, CO2, OZONE & NITROGEN OXIDES
FORMED BY THE RADIATION FROM ARC. WELDING FUMES - COMPLEX OXIDES
FROM THE INGREDIENTS.
Disposal
Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER, OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE, & L OCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.